If you’re currently faced with such a problem, we’ll show you how to unclog toilets without using a plunger or a snake. Is it even possible? Stick with us to find out.
A plunger is an important tool that’s used in clearing up blockages in drainage, toilets, and pipes. It’s a simple piece of equipment consisting of two main parts; a rubber suction cup and an attached stick.
Sometimes, you might be faced with toilet problems where this tool is absent.
How To Unclog A Toilet Without A Plunger Or Snake
The absence of a plunger doesn’t have to be a hindrance when it comes to cleaning your toilets. There are lots of options to consider when it comes to performing this task.
These range from the use of hot water, Epsom salt, toilet brush as well as baking soda & vinegar.
Other alternatives include exercising some patience, dish soap, drain cleaners, and using a wire hanger. The good thing with these strategies is that you get to use readily available household items to get the job done.
These are as effective and should give you relief in little time. For a fuller understanding of how each of these strategies is applied, let’s get into the details.
Using Hot Water
Toilets can be unclogged by using hot water. It’s important to note, however, that the hot water poured into the toilet shouldn’t be boiling water. The reason for this is obvious; your toilet seat might not have the tolerance for boiling water.
This may result in broken toilet bowls which are even worse than having a clogged toilet. The water should be hot enough to provide heat that breaks up the blockage. The agitated movement that results when the water is poured in should help to shake or dislodge the blockage.
You may want to add some shampoo to the hot water to help create a slimy surface. A sufficient squirt of shampoo should be sufficient to give the blockage the needed push down the drain.
Epsom Salt or Bath Bomb
Apart from its many therapeutic uses, Epsom salt can also be used to unclog toilets. There are times when using a toilet may suddenly result in clogs.
In such situations, you may want to look around for one of the many readily available household items; Epsom salt.
When applied to clogged toilets, the reaction that ensues will help agitate the blockage which may make way. The use of Epsom salt can be combined with any other strategy listed in this article for faster clearance.
When clogs become stubborn and don’t seem to budge with the use of other methods, a toilet brush may come in handy. However, this is done to dispose of the brush once you’ve succeeded in unclogging the toilet.
Toilet brushes get messy and will need to be disposed of in exchange for a new one.
The use of a toilet brush requires protective gear such as gloves and goggles. These are worn and the brush is inserted into the drain hole. A back and forth action are carried out until the solids or blockages are cleared out of the way.
You mustn’t apply too much pressure during this cleaning action as it may end up creating more damage.
After the process, the toilet bowl should be disinfected and the surrounding areas where splashes may have occurred. A thorough cleaning should follow.
Baking Soda & Vinegar
One of the readily available items to be found in most households includes baking soda and vinegar. These also come in handy when unclogging your toilet without a plunger.
All you need is to first pour out about a cup of baking soda into the toilet bowl.
Next, this should be scattered around the surface area and allowed to sink. Get some vinegar and pour out about 2 cups of it into the toilet bowl. Do not pour directly or indiscriminately. Rather, it should be done systematically in a circular fashion.
What results is a fizzling action that should be allowed to go on for about an hour or more. The same process can be repeated and left for longer periods than the initial time. Your clogging issues should be gone in a little time.
Exercising Some Patience
How is patience even an unclogging strategy?
While this may sound unrealistic, patience does provide solutions to clogging issues. However, the level of the solution provided depends on the cause of such clogging.
More complex underlying issues may not be resolved by applying this method.
During a toilet clog situation, the water is left to sit for as long as necessary to obtain results. What happens here is that downward pressure is exerted by water which pushes down on the obstacles below.
Such a problem may be resolved overnight or may require other strategies. For this to have any effect, the toilet bowl will need to be almost filled up. The more the water, the more downward pressure is applied.
However, this creates a problem when waiting it out doesn’t give you the results you seek. You may want to apply other strategies as a last resort or call the pros when the problem persists.
Some dish soap added to hot water can do the magic in clearing out toilet clogs.
You only need about a cup or two of dish soap poured into the bowl. This should be followed by hot water and allowed to sit for some time.
We normally don’t recommend drain cleaners among our clog removers due to their harsh nature. However, this should only be used as a last resort when there are little or no viable options.
Drain cleaners help break up dirt lodging down your toilet drain.
How To Unclog A Toilet With A Hanger
When it comes to agitating clogs directly, wire hangers come as a handy remedy.
You’ll need to get any you can spare from your closet and unfold it. This should be inserted into the toiled drain and prodded until the blockage is loosened. The hanger will have to be maneuvered to get through the curves of your toilet drain.
These are ways to unclog your toilets without the need for a plunger or snake. While these have been proven to work, it’s necessary to get a plunger for this task if you can.